New Feature

Click on Columnists  to access travelogues, field reports, advice, humorous tales and answers to your Q’s! 


Website of the Week


How to Repair Aluminum Boat Hulls

Photos and article by Don Stec
03/14/15 -- Today there is a lot of talk in the trade magazines about aluminum and how difficult it is to repair. It is different from steel, but it can be repaired with the proper training and equipment. What is much more uncommon is straightening aluminum sheet panels. Most boat owners when getting damage estimates have told me it was recommended to replace the entire panel because straightening aluminum sheet metal is not possible.

The transom had been severely damaged on this used drift boat as seen from the interior. Photo by Don Stec
The transom had been severely damaged on this used drift boat as seen from the interior.

Repair of a transom damaged this severely takes a great deal of experience working with aluminum. Photo by Don Stec

Repair of a transom damaged this severely takes a great deal of experience working with aluminum.

The photos show damage before and after a repair on a boat transom. The transom was ripped apart and distorted after the anchor got stuck on the bottom while the boat was in a fast river current.

This article is not written to teach someone to work with aluminum. This could not be done without hands-on experience. It is intended only to explain why aluminum is more difficult to work with and why most metal workers prefer to replace rather than repair. Replacing damaged panels are often more than a boat is worth. But if the panel could be straightened and welded together the boat could be saved.

Straightening aluminum can be difficult when it is bent because the molecules become distorted and the distorted area becomes hardened. Hitting the aluminum with a metal hammer to straighten it will cause the molecules to distort further. This is known as work hardening. To straighten, the hardened area must be heat treated to relax the molecules in the metal. If the aluminum becomes overly work hardened, it will become brittle and crack easily. At this point the panel is not savable and will have to be partially or completely replaced.

Interior hull of fishing skiff repaired by Don Stec, photo by Don Stec
The owner elected not to paint the interior. He just wanted a serviceable, watertight craft as shown in this interior view of the rear,

exterior hull stern of fishing skiff repaired by Don Stec, photo by Don Stec

Repairs of this type are not DIY recommended but a reputable repair shop with the right equipment and experience may be able to put you back on the water at a reasonable cost.

Repairs are made by bending the aluminum back into place while using the proper heat to remove work hardening. This is known as relaxing the molecules. Hydraulic jack pressure is used to return the panel back to its original shape. A soft headed hammer and dollies are used to assist. It is difficult to find a shop that has a hydraulic machine that can be positioned in many angles to push or pull the aluminum in the proper direction. Once returned to its original location it can be welded together. Of course a panel may be damaged beyond repair. In this case we often are able to replace a portion of the panel.

A cautionary note: Aluminum stretches easily. Improper hammer blows will distort it easily and render it unrepairable. Aluminum does not change color when it is heated. It will give no warning when it is overheated and just fall away leaving a large hole.

Coachmaster has been working with aluminum since the late 1960’s and is certified in aluminum welding and aluminum brazing. Our frame machine is capable of literally hundreds of angles to restore aluminum to its original shape. We are primarily an auto body shop but also an insurance approved repair station for boat repair and RV’s. We can be reached at 530-243-1310 or at the business at 6851 Eastside Road, Redding, CA.

Don Stec is the owner of Coachmaster of Redding. Coachmaster is a full service collision repair shop also specializing in the repair of recreational vehicles, trailers and boats. The company works with all the major insurance companies and has a great reputation in the North State.

More columns by Don Stec


Your outdoor adventures have only just begun
Northern California Fishing News, Northern California Hunting Reports

Fishing News

Northern California and Southern Oregon offer superb fresh and saltwater fishing. Before you make a trip, make sure you have
up-to-date news about where the fish are biting!

Hunting News

This region is also famous for its world-class hunting opportunities. Make sure you are armed with the absolute latest news by checking
the reports being filed daily at

Northern California Outdoor News, Northern California Outdoor Reports Outdoor News 

If you like to explore the great outdoors your choices are essentially infinite in Northern California and Southern Oregon. Use our news pages to plan your next outing!

Northern California Destination News, Northern California Destination Reports


So many places to visit and so little time, but if you scan
these pages you'll know in advance what lies ahead and what
not to miss in the almost-mythical State of Jefferson.
Buddy Photos

You are there! Towering mountains, vast valleys, unique shorelines. Land, water and air bursting with life. Opportunity presents itself. Llghting is right. Click! An image is captured for the ages.

Photo Galleries,

Photo Galleries

A preview of coming attractions...if you are planning a trip to this area be forewarned: What photographers have captured will whet your appetite for what will be an outdoor journey filled with wonders.  

Product & Services Directory

Don't let anything come between you and a wonderful weekend, vacation or or auto tour in this region. The fine product and services providers listed here will have what you need to enjoy your visit.  

Come back to for more Northern California and Southern Oregon fishing, hunting and outdoor news, reports, information, opinions and photos.


A friend to all who love the outdoors since 2006

Website Design Photo Credits: thanks the following individuals for contributing photographs for use on our Home and Section pages: Anders Tomlinson of, Casey Allen of Bayside, CA; Jason Haley of Medford, OR; Steve Breth of Burney, CA; Tracy McCormack of Eureka, CA; Grant Thompson of Grand Junction, CO; Richard Bott of Shingletown, CA; Ron Loftus of Yreka, CA; Scott Caldwell of Montague, CA; Lorissa Soriano of Alturas, CA and the late Dave Menke, formerly with the U.S. Fish & Wildlife Service, Klamath Basin National Wildlife Refuge Complex.

Website Design by Anders Tomlinson

©Copyright 2005-2015 by Frank Galusha, Editor and Publisher. Articles and photos are copyright protected and are published exclusively on the Internet by the publisher and may not be copied, displayed, reproduced or published in any other form without the express written permission of same who reserves all rights. Material supplied by others is the copyrighted property of the respective authors. Re-use of any MyOutdoorBuddy content, graphics and photos without written permission by the author(s) for any purpose is strictly prohibited.